Продукти за hdpe гранули (23)

It is a material with a high resistance to chemicals. Its specific weight is low. It is a slippery material with a low coefficient of friction. The water and moisture absorption property is close to zero. It can be used as cutting plate especially in industrial kitchens and butcher cutting log. It has the ability to be welded. The element that characterizes polyethylene is the molecular weight. Low molecular weight can be grouped into three groups: low molecular weight (PE 300), high molecular weight (PE 500) and ultra high molecular weight (PE 1000).

Bitumer Flexigum PU ist eine zweikomponentige Bitumen-Polyurethan-Verbindung, die eine dauerhaft flexible und chemisch beständige Befestigungs- und Spannungsübertragungsmasse bildet. Bitumer Flexigum PU findet seinen Einsatz in: •zur dauerelastischen Befestigung der Schiene als Unterboden, •Schienenbefestigungsmasse und als Unterbodenbelag, •zur Herstellung dauerhafter und flexibler Dehnungsfugen zwischen Betonplatten und Elementen aus Stahl, •Ausfüllen der Lücken zwischen Fahrbahn und Schiene, •zum Füllen von Beton-Beton-Fugen •Verfüllen von Fugen, Lücken, Rissen und Dehnungsfugen in stark bearbeiteten Asphalt- und Betondecken (z. B. Bordsteine ​​auf Brücken), •Verfüllen von „arbeitenden“ Fugen auf Stahl- und Betonbrücken und anderen Gehwegen, die durch starke Bewegungen gekennzeichnet sind.

Syntech HAG Stabiland Product consumption depends on the size of the void volume to be filled and on the expansive reaction that is triggered after mixing the two components in relation to the amount of water present. Can 21.5 kg [A] - Can 24.5 kg [B] - Kit: 1 Can 21.5 kg [A] + 1 Can 24.5 kg [B]

Fire Resistant Plasterboard Type DF consists of gypsum core reinforced with special additives and clay, enclosed between special paper for enhanced fire resistance. Application: • Ceiling • Wall • Areas with higher requirements for fire protection such as evacuation corridors, stairways, industrial premises, etc. Ideal for indoor use in areas with normal humidity up to 60% Advantages: • High density of gypsum core for better sound insulation and stability Type D • Increased resistance to high temperatures Type F • Easy to cut and mount TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000-3000 10.00 60 pcs 15 1200 2000 12.50 50 pcs Thickness (mm):12.5 / 15 Width (mm):1200 Length (mm):2000-3000

HALBZEUGE AUS PTFE, COMPOUND, PCTFE, HT-KUNSTSTOFFEN SOWIE KONFEKTIONIERUNG VON PTFE-GLASGEWEBE

* It is applied in 2 cm thickness. * 1 package of product is 20 kg. 1.6-1.8 kg of product is required for 1 m2 area. * You can easily reach an application area of ​​12 m2 by using a 20 kg Multiyap and a 6 mm notched trowel. * By providing waterproofing, even if the joint fillings between the tiles deteriorate, water does not leak to the lower floor. * There is no need to make water isolation in bathroom applications. * Since it is a hydrophobic product, a single product provides both water isolation and a strong tile ceramic application with superior performance. * It is quite light. It reduces labor and transportation costs. * It is flexible and the working time is extended. * It has strong adhesion feature.

Durch individuelle und auftragsbezogene Produktion von Halbzeugen können wir die Möglichkeiten hier nur in Grenzen aufzeigen. Werkstoffe PE, PP, PS, ABS, PVC, PET usw.

Technische Kunststoffe

DURAVOLTA ist ein neu entwickeltes, flammgeschütztes, wärmestabiles Polypropylen für die elektrische Isolation, made in Germany. Anwendungsbereiche • Computer und Peripheriegeräte • elektrische Energie-Verteilersysteme • Telekommunikationsanlagen • Stromversorgungsgeräte (konventionell & unterbrechungsfrei) • Medizinische Geräte, Beleuchtung • Haushalts- und Elektronikgeräte, Fernseher • Fahrzeugkomponenten

Fundierte Fachkenntnis über Verarbeitung der Materialien sowie der Einsatz moderner Maschinen und Verfahren ermöglichen schon bei kleinen Losgrößen- sowie auch bei großen Serienfertigungen wirtschaftlich hergestellte Endprodukte. Die ganze Bandbreite der Elastomere wie EPDM, Viton, FKM /FPM, HTV , Silicon Festkautschuk, CR, NBR, NR, NK, BR, SBR, Butyl, IIR, NR, LSR, Fluor-Silikone findet in der Sicherheitstechnik ihre Spezialanwendung

Qualität: PUR 80 Shore A Einsatzbereich: Anschlag- / Transportschutz Fertigung: Wasserstrahlschneiden / Fräsen / Verkleben

Die Serie HP-E3000GL besitzt eine Zulassung vom Germanischen Lloyd für den Bau von Booten und Windkraftanlagen und ist individuell mit verschiedenen Härtern auslieferbar.

Das von Biosepar völlig neu entwickeltes formalinfreies Fixiermedium hat viele Vorteile gegenüber den formalinhaltigen früheren konventionellen Fixiermittel. Diese sind u.a.: Allgemein bessere Färbeeigenschaften von Gewebe und Zellen, die die diagnostische Qualität und Sicheheit enorm erhöhen, keine Gewebeschrumpfungen durch Denaturierungen, keine störende färberische Artefacte, intakte immunologische Sensitivität von Antikörper und Antigen, Vermeindung der irreversiblen Vernetzung von DNS und RNS und fehlende Giftigkeit, wodurch keine Entsorgungsprobleme bestehen. Das FixSepar® ECO PLUS Histology (FEPH®) bietet für alle Human- und Veterinärmediziner, Biologen, Immunologen und Molekularbiologen zukünftig bessere Ergebnisse und günstigere, ungefährliche Arbeitsbedingungen.

Acrylic copolymer is an emulsion-based, silicone-folded, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

50.5002.00 - PVC-Kleber

PTFE Platten in folgenden Abmessungen 600 x 600, 1.000 x 1.000, 1.000 x 2.000, 1.200 x 1.200, 1.500 x 1.500 mm von 0,5 - 100 mm Stärke.

Silicon nitride is one of the hardest ceramics but also one of the most resistant. Si3N4 is mainly used in severe environments which combine extreme temperatures with abrasive and/or corrosive medium. Silicon nitride can be of different grades : sintered, hot pressed or reaction bonded. Selection of materials Microcertec offers two high-purity Si3N4 grades that are particularly suited for hostile environments : sintered silicon nitride hot pressed silicon nitride Both Si3N4 materials are mainly designed to be used in thermal-mechanical or corrosion-resistance applications because they show an outstanding behaviour to resist to wear, thermal shocks and corrosion (liquids and gases). Moreover, these pure Si3N4 grades offer a low thermal expansion. Properties Sintered silicon nitride and HP Si3N4 have the following properties : low density excellent thermal shock resistance excellent wear resistance excellent corrosion resistance (liquids and gas) low coefficient of thermal...

La miel de Bosque no es producidas por las abejas a partir del néctar de flores, sino de un mielato que exudan las encinas, alcornoques y robles. Su color es mucho más oscuro que el resto de las mieles, su olor es tostado y su sabor es menos dulce que el resto de mieles, con toques salados. Se envasa artesanalmente en formatos para comercio retail o en formatos de mayor capacidades para la industria.

SUTOP CIFT TAM ELASTIK Cement and Acrylic-Based Double Component Full Elastic Water Insulation Material APPLICATION FIELD Used in wet areas such as bathrooms, WCs, kitchens, balconies, etc. and for insulation of water tanks, pools and terraces. Applied on surfaces such as concrete, plaster and screed.

HATO®Protect ist eine grundierende Brandschutzbeschichtung für Holzkonstruktionen im Bühnen- und Messebau sowie bei anderen Dekorationsbauten. Schwer entflammbar (Euroklasse C), DIN EN 13501-1. HATO®Protect ist geeignet für Holzmaterialien wie Tischlerplatten, Sperrholz, Spanplatten, Multiplex-Platten, MDF-Platten etc. Nach der Verarbeitung kann die Fläche mit HATO®Color nach Bedarf farblich gestaltet werden ohne dass das Prüfzeugnis seine Wirkung verliert. HATO®Protect ist erhältlich in den Farben hellgrau und anthrazit. Lieferbare Farbtöne:: hellgrau und anthrazit Lieferbar in:: 5 kg und 12,5 kg Gebinden Brandschutzklasse:: DIN13501-1 Prüfzeugnis:: vorhanden

Syntech Poliurea Top Coating A protective, pigmented, two-component formulation based on aliphatic polyurethane resins, ideal as a protective and aesthetic coating on waterproofing with SYNTECH POLIUREA SPRAY. Characterised by high levels of elasticity and elevated protection, even in aggressive atmospheres. Available on request in shades from the RAL colour range. Surface coating pigmented for colouring polyurethane claddings, and their protection from UV rays (which in the absence of the top coating would alter the colour over time). After suitable priming with SYNTECH POLYUREA PRIMER, it can also be applied as a simple coloured aliphatic protective coating. Polyurea support Vacuum and blow the surfaces to eliminate any dust that may have accumulated in the 24-48 hours following the installation of SYNTECH POLIUREA SPRAY Support in concrete, mortar, brick, tiles The support on which the polyurea system must be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. It is recommended to use Primer from the SYNTECH POLIUREA PRIMER range. On particularly absorbent substrates, to avoid the formation of craters / blowholes on the surface of the freshly sprayed product, it is recommended to use primers from the SYNTECH POLIUREA PRIMER range, always contacting the Azichem technical staff for clarification on the most suitable type to use. Apply several layers of primer until the porosity is saturated and providing a light dusting with clean and dry quartz sand (0.4-0.7 mm). Never dust off the primer. Provide suitable elastic sealing systems to cover joints, fittings, cracks or fissures subject to significant movements. Pour component B with component A into a single container, taking care to remove all the material from the packaging. Mix thoroughly with a mixer at low revs, until a lump-free mixture is obtained. Apply with a roller or brush on the surfaces of SYNTECH POLYUREA SPRAY, within 24-48 hours of spreading the latter. A thorough sanding of the supports is recommended for any repairs and/or finishes. From 0.15 to 0.25 kg of SYNTYECH POLIUREA TOP COATING for each square metre of surface to be covered. Can 6.7 kg [A] - Can 3.3 kg [B] - Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B]

Syntech HAG Acryl Syntech HAG Acryl is a four-component resin that reacts to form an elastic and durable gel. The properties of Syntech HAG Acryl are: • Good general chemical resistance. • Does not contain acrylamide, methacrylamide, formaldehyde or solvents. • Not inflammable. • Excellent adhesion on mineral building materials such as concrete, cement and bricks. • The reaction speed can be adjusted from a few seconds to several minutes. • When the injected cracks dry out due to temperature or groundwater level fluctuations the gel does not crack easily. • The hardened gel has excellent durability in wet-dry cycles. Syntech HAG Acryl components are supplied ready to use. Create 2 mixes in separate plastic buckets. Prepare only the quantity to be used each time. Solution 1: Syntech HAG Acryl component A (25 kg resin) mixed with Syntech HAG Acryl component B (2.5 kg catalyst). Solution 2: Syntech HAG Acryl component C (2 packs of 0.625 kg) mixed with clean tap water. Attention: The amount of water must be equal in volume to solution 1. When mixing resin, always use a wooden or stainless steel spatula. The reaction time depends on the temperature of the material, the structure of the building and the possible amount of water present. Higher temperature will speed up the reaction time and lower temperature will slow it down. It is advisable to carry out an on-site test, before injection, to observe and define the reaction time. To change the reaction time, only adjust the amount of Syntech HAG Acryl component C. The amount of the other components remains the same. Use a two-component stainless steel pump (manual, electric or pneumatic). Check that the pump and equipment are clean and that there is no residue from previous injection work. The two mixtures are fed into the pump separately, but are mixed homogeneously at a volumetric ratio of 1:1 in the pump's mixing head, before being injected through the pump nozzle. Check the quality of the concrete, as injection involves pressure. Sealing and waterproofing of cracks and cavities in walls, floors, concrete constructions, underground structures, etc. It can be used in constructions that are not permanently in contact with water (fluctuating groundwater level). Injection of very fine cracks. Determine the type and size of packers based on your pump and injection type. If reinforcing steel is present, try to locate it and plan the drilling pattern so that the reinforcement is not drilled. Drill holes at an angle of approximately 45° or less and in the direction of the crack. Make sure the hole goes through the crack. The distance of the drilled holes depends on the width of the crack. Place the packer in the hole. Prepare the pump to start the injection. The injection pressure varies depending on the structure and size of the crack. Start the injection at the lowest point of the crack. Continue injecting until resin flows out of adjacent packer(s). This is necessary to achieve uniform distribution of the material. Stop pumping, unplug and move on to the next packer. Continue the procedure until the crack is completely filled. After the material has cured, the packers can be removed. Holes drilled can be covered with Repar Tix Speedy HP quick-setting mortar. Clean and rinse the pump equipment with water whenever there is a stoppage longer than 15 minutes and, after completing the injection, rinse with a sufficient amount of water. Make sure the pump is clean and stop only when clean water comes out of the pump. The consumption of the product depends on the size of the empty volume to be filled. Can 25 kg [A] - Plastic can 2.5 kg [B] - Canister 0.625 kg [C] - Canister 0.625 kg [D] - Kit: 1 Can 25 kg [A] + 1 Plastic can 2.5 kg [B] + 1 Canister 0.625 kg [C] + 1 Canister 0.625 kg [D]

1- Su yalıtımı sağlayarak fayanslar arasındaki derz dolgular bozulsa bile alt kata su kaçırmaz, bina sakinlerini tamir masraflarından korur. Banyo uygulamalarında ayrıca su izolasyonu yapmaya gerek yoktur. Süper Hidrofobik bir ürün olduğu için tek bir ürün ile hem su izolasyonu sağlanmış olur hemde üstün performansa sahip güçlü bir fayans seramik uygulaması yapılmış olur. 2- Oldukça hafiftir. 3- 20 kg lık Multiyap Süper ile 6 mm taraklı mala kullanılarak 12 m2 lik uygulama alanına rahatlıkla ulaşabilirsiniz. 4- Hafifliği sayesinde inşaatlarda işçilik ve nakliye maliyetlerini düşürerek büyük oranda tasarruf sağlar. 5- Esnektir ve çalışma süresi uzatılmıştır. 6- Kuvvetli yapıştırma özelliğine sahiptir.